English 
日本語 
ภาษาไทย 
한국어 
العربية 
Latine 
Español 
Português 
русский 
Français 
Deutsch 
tiếng Việt 
Italiano 
Nederlands 
Polski 
Svenska 
magyar 
Malay 
বাংলা ভাষার 
Dansk 
Suomi 
हिन्दी 
Pilipino 
Türkçe 
Gaeilge 
Indonesia 
Norsk 
تمل 
český 
ελληνικά 
український 
Javanese 
فارسی 
தமிழ் 
తెలుగు 
नेपाली 
Burmese 
български 
ລາວ 
Қазақша 
Euskal 
Azərbaycan 
Slovenský jazyk 
Македонски 
Lietuvos 
Eesti Keel 
Română 
Slovenski 
मराठी 
Srpski језик 
1.PRODUCT FEATURE OF GNS® ADHESIVE PU FOAM MANUAL TYPE A99
●Powerful adhesion of polystyrene heat panels (XPS and EPS).
●Instant adhesion and wall plugging within two hours.
●Minimum 14 m² heat insulation panel adhesion for each can.
●Minimum expansion during drying period.
●After dried, no further expansion and shrinkage.
●A lighter material compared to plaster, alternative material, used in heat insulation systems.
●No more extra burden or weight to building.
●High yield up to 50 liters, depending on the humidity and temperature.
●Usable at low temperature like 0 °C
●It does not contain any propellant gases which are harmful to the ozone layer.
2.PERFORMANCE DATA OF GNS® ADHESIVE PU FOAM MANUAL TYPE A99
| Base | Polyurethane |
| Consistency | Stable Foam |
| Curing System | Moisture-cure |
| Tack-Free Time (min) | 6±2min |
| Drying Time | Dust-free after 20-25 min. |
| Cutting Time (hour) | 20-45MIN (+25℃) |
| Yield (L) | 5055L |
| Yield Metric | 14 m² |
| Shrink | None |
| Post Expansion | None |
| Cellular Structure | > 90% closed cells |
| Specific Gravity (kg/m³) | 17~22 |
| Shear Strength | 92 kgf/cm² |
| Temperature Resistance | -40℃~+100℃ |
| Application Temperature Range | +5℃~+35℃ |
| Colour | Champagne |
| Fire Class (DIN 4102 ) | B2 |
| Insulation Factor (Mw/m.k) | <30 |
| Compressive Strength (kPa) | >120 |
| Tensile Strength (kPa) | >30 (10%) |
| Adhesive Strengh(kPa) | >80 |
| Water Absorption (ML) | 2~3(no epidermis) |
| <0.5(with epidermis) |
3. APPLICATIONS AREAS OF GNS® ADHESIVE PU FOAM MANUAL TYPE A99
●Best for mounting heat insulation panels(styrofoam) and filling voids during adhesive application.
●Advised for wooden type construction materials adhesion to concrete, metal etc.
●Applications needed minimum expansion.
●Mounting and isolation for frames of windows and doors.
4.APPLICATION INSTRUCTIONS OF ADHESIVE PU FOAM MANUAL TYPE A99
5.STORAGE AND SHELF LIFE OF ADHESIVE PU FOAM MANUAL TYPE A99
12 months in unopened packing store in temperature between +5℃ to +25℃, Keep in cool, shade and well ventilated area. Always keep the can with the valve pointed upwards.
6.PACKING, SHIPPING AND SERVING OF ADHESIVE PU FOAM MANUAL TYPE A99
Packing: 750ml 500ml 300ml, 12 cans/carton. (For special specifications, please contact us.)
Shipping: Sea or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.
7.FAQ
Q: What is the different of the pre-expansion and post expansion? Which one is better?
A: Pre-expansion is better. Post expansion will not only damage the doors and windows after curing, but also it will leads the cost of construction higher because more foam must be cut.
Q: Why should we choose a PU foam with good elasticity?A: Because the PU foam with good elasticity will not damage the doors and windows in hot weather, because its structure inside is better.
