1.PRODUCT FEATURE OF GNS® GAP FILLER G212
*One part.
*Waterproof & Paintable.
*Excellent adhesion to most construction materials, concrete, plaster, cement, brick, wood.
*Superior gunning & tooling.
*Non slump,water based ,low odour and non toxic .
2.TYPICAL PROPERTIES OF GNS® GAP FILLER G212
Color: | White |
Odor: | Mild |
Consistency: | Smooth Paste |
Flash Point: | Above 100℃ |
Vehicle: | Acrylic Latex Polymer |
Solvent: | Water |
Dry to touch: | 30-60 minutes |
% Solids: | 82% +/-1% |
Recommended Storage Temperature: | 25℃ |
Shelf Life: | 12 Months |
3.APPLICATIONS AREAS OF GNS® GAP FILLER G212
*Filling gaps in walls , balustrades ,sills.
*Connecting joints in plasterboard
*Small plaster repairs before painting.
*Sealing around window and door frames
*Sealing of aerated concrete
*Sealing of low movement construction joints between brick , concrete ,timber
4.APPLICATION INSTRUCTIONS OF GNS® GAP FILLER G212
--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.
--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.
--Place the cartridge into a caulking gun.
--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.
5.STORAGE AND SHELF LIFE OF GAP FILLER G212
12 months from manufacturing date when store in cool dry locations below 25℃. Keep away from heat source and direct sunlight during storage.
6.PACKING, SHIPPING AND SERVING OF GAP FILLER G212
Packing : Aluminum tube--310ml, Sausage--600ml
Shipping: Sea, air or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.
7.FAQ
Q: Are you a manufacturer?
A: Yes. Our company-GNS is the biggest PU Foam and Silicone Sealant manufacturer in Asia. PU Foam factory in Tianjin ,near Beijing , Silicone Sealant factory in Foshan , Guangdong province China .GNS with 19 years experience in this industry, we have served clients from more than 77 countries. GNS is well- known for its quality and our team win clients' trust by honesty and down to earth business style.
Q: How long can I get a quote?The quotation can be provided not longer than 24 hours on condition that we know all detailed requirements.
Q: How to find the suitable sealants?A: Please let me know your application purpose, substrate, application method and all your requirements.