1.LABORATORY TEST VALUES OF GNS® TWO COMPONENTS PU SPRAY FOAM MASENSE CF 020/2 C-A:
Item | Value | M20S | Unit | Test Standard |
Appearance | Viscous Liquid | Viscous Liquid | --- | W00027 |
Viscosity (25°C) | 3000±500 | 210±40 | mPa s | W00034 |
Density (25°C) | 1.05±0.05 | 1.23±0.05 | g/cm3 | W00090 |
2. REACTION GUIDE OF GNS® TWO COMPONENTS PU SPRAY FOAM MASENSE CF 020/2 C-A:
Masense CF 020/1 C-A | A | 100 | pbw |
Lupranate M20S | B | 120 | pbw |
3. CUP TEST OF TWO COMPONENTS PU SPRAY FOAM MASENSE CF 020/2 C-A:
Test Condition | Stirrer Speed: 3000rpm, RT 20-25℃,Cup Size:500ml | ||
Mix weight | 30~40g |
|
|
Material Temp. | 20~22 | °C |
|
Stirring Time | 3 | s | Test Standard |
Cream Time | 5±1 | s | W00089 |
String Gel Time | 15±2 | s | W00089 |
Free Rise Cup Density | 40±3 | kg/m3 | W00089 |
4. PACKAGING OF TWO COMPONENTS PU SPRAY FOAM MASENSE CF 020/2 C-A:
200kg content(blue drum).
5. STORAGE OF TWO COMPONENTS PU SPRAY FOAM MASENSE CF 020/2 C-A:
The components are sensitive to humidity and should therefore be kept in sealed drums at all times. | |
Recommended Storage Temp. | 15 – 25°C |
Shelf Life | 6 months |
6. PREPARATIVE WORK OF TWO COMPONENTS PU SPRAY FOAM MASENSE CF 020/2 C-A:
The components A and Component B don’t need to be stirred.
7. RECOMMENDED PROCESSING OF TWO COMPONENTS PU SPRAY FOAM MASENSE CF 020/2 C-A:
Machine Type | High Pressure Machine |
Machine Temperature | 35-45°C |
Material Temperature | 18-22°C |
Demould Time | 30min (100mm thickness) |
8. TYPICAL PHYSICAL PROPERTIES OF TWO COMPONENTS PU SPRAY FOAM MASENSE CF 020/2 C-A:
The samples were produced by High Pressure Machine. |
|
Test Standard | |
Core Density | 39.0 | kg/m3 | DIN ISO 845 |
Compressive Strength (10%, parallel) ∥ | 200 | kPa | DIN ISO 844 |
Compressive Strength⊥ | 150 | kPa | DIN ISO 1209 |
Close-cell Content | 96 | % | DIN ISO 4590 |
Initial K Factor(10°C) | 22.8 | mW/m.K | EN12667/Hesto |
Dimensional Stability |
|
|
|
24hours, -30°C | <1.5 | % | DIN ISO 2796 |
24hours, +70°C | <1.5 | % | DIN ISO 2796 |
Remark: The foam is made by hand-mixing. The foam properties may be different if foaming condition is different.
9.PRODUCT QUALIFICATION:
Waste Disposal
Please refer to the “material safety data sheet” or follow local laws and regulations.