1.PRODUCT FEATURES OF GNS® WEATHERPROOF MS SEALANT
●Solvent-free, PVC-free, isocyanate-free, non-toxic, odorless, and non-polluting to the environment;
●Low modulus, Excellent movement ability 25%;
●Excellent adhesion to most construction materials, Stone, metal, ceramics and concrete;
●Can be used in bad weather thanks to good weather-, temperature-, UV-resistance;
●Can be painted, non-staining waterproof and eco-friendly product;
●Neutral cure, non-acidic, will not corrode metal or other corrosion-sensitive material.
2.TYPICAL PROPERTIES OF GNS® WEATHERPROOF MS SEALANT
Test Parameter |
Unit |
Result |
As Supplied Tested at 23℃ and 50% RH |
||
Flow (sag or slump) |
mm |
0 |
Skin Time |
hour |
1 |
Mass Loss |
% |
2.8 |
Extrudability |
ml/min |
186 |
Movement Capability |
% |
±25 |
23℃ Tensile/Modulus |
Mpa |
0.9 |
Elastic Recovery Rate |
% |
86 |
Elongation at break |
% |
400 |
Max Tensile Strength |
MPA |
0.6 |
3.APPLICATIONS AREAS OF GNS® WEATHERPROOF MS SEALANT
●Jointing filling and sealing of all kinds of marble, granite curtain wall engineering and cement prefabrication engineering;
●Concrete expansion joint sealing of road engineering;
●Sealing of prefabricated building joints and high building expansion joints;
●Sealing of window & door frames, Panel seams and ceilings, Water pipes, roof gutters,movable houses and containers
●Interior decoration sealing.
4.APPLICATION INSTRUCTIONS OF GNS® WEATHERPROOF MS SEALANT
--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.
--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.
--Place the cartridge into a caulking gun.
--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.
5.STORAGE AND SHELF LIFE OF WEATHERPROOF MS SEALANT
12 months from manufacture date when store in cool dry locations below 27℃, keep away from heat source and direct sunlight during storage.
6.PACKING, SHIPPING AND SERVING OF PROFESSIONAL USE PU FOAM GUN TYPE
Packing : 300ml plastic cartridge, 24 pcs/ctn, 590ml aluminum sausage, 20 pcs/ctn
Shipping: Sea, air or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.
7.FAQ
A: Sample is available and free, please contact us or send your requirements by email.
Q: How can you guarantee the quality?A: We have rigorous quality test system, from raw materials to finished products, the materials must be checked and confirmed by QC department.