High Temp 315℃ Silicone Sealant

High Temp 315℃ Silicone Sealant

As the professional manufacture, we would like to provide you high quality GNS® High Temp 315℃ Silicone Sealant. And we will offer you the best after-sale service and timely delivery.
High temp 315℃ Silicone Sealant is a high quality, ready to use one component acetic silicone sealant, which withstands very high temperatures: up to +315℃ during permanent work and for temporary contact. It can be used as engine pad. Ideal repair of automobiles and motorcycles: sealing of engine and transmission components and accessories.

Send email to us Send Inquiry Manual

GNS High Temp 315℃ Silicone Sealant have characteristic design & practical performance & competitive price, for more information on the High Temp 315℃ Silicone Sealant, please feel free to contact us. We hope to establish friendly cooperative relationship with your company with high quality products, reasonable price, considerate service and create a better future hand in hand.

1.PRODUCT FEATURE OF GNS® HIGH TEMP 315℃ SILICONE SEALANT

●Use temperature range from -40℃ to +315℃
●Movable seams fit
●Excellent adhesion to glass, brick, metal, ceramic, enamel, impregnated or painted wood and laminate, etc.
●Sealing of engine and transmission components and accessories.

PU Foam Sealant Gun Type


2.PRODUCT PARAMETER (SPECIFICATION) OF GNS® HIGH TEMP 315℃ SILICONE SEALANT

Test Parameter Unit Result
As Supplied Tested at 23℃ and 50% RH
Specific Gravity g/ml 0.98±0.02
Flow (sag or slump) mm 0
Extrusion Rate ml/minute 130
Skin Time minute 5~10
Tack-free Time hour ≤1.0
Curing time (5mm) hour ≤8
As Cured-after 21 days at 23℃ and 50% RH
Durometer Hardness, Shore A Points 30
Movement Capability % ±25
Tensile/Modulus at 50% Elongation Mpa 0.32
Tensile/Modulus at 100% Elongation Mpa 0.38
Ultimate Tensile Strength Mpa 0.45
Ultimate Elongation at Break % 300

3.APPLICATION OF GNS® HIGH TEMP 315℃ SILICONE SEALANT

PU Foam Sealant Gun Type

--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.
--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.
--Place the cartridge into a caulking gun.
--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.

4.STORAGE AND SHELF LIFE OF HIGH TEMP 315℃ SILICONE SEALANT

12 months from manufacture date when store in cool dry locations below 25℃, keep away from heat source and direct sunlight during storage.

5.PACKING, SHIPPING AND SERVING OF HIGH TEMP 315℃ SILICONE SEALANT

Packing: 220ml to 300ml of cartridge, 590ml 600ml of sausage, 190L of drum. 24 ctgs/ctn of cartridge, 20 pcs/ctn of sausage. (For special specifications, please contact us.)
Shipping: Sea, air or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.

PU Foam Sealant Gun TypePU Foam Sealant Gun TypePU Foam Sealant Gun Type

6.FAQ

Q: What’s the reason that after the silicone sealant cured, it will be crack out of the base material?

A: The base material is not match for silicone sealant or there are some duct on the base material surface when use the silicone sealant. In order to avoid this happen. Before use the silicone sealant, please kindly clean the base material surface and recommend to do the compatibility test.

Q: What’s the difference between Neutral silicone sealant and Acetic silicone sealant?

A.Neutral silicone sealant can be used both indoor or outdoor, but acetic silicone sealant just can be used indoor.

PU Foam Sealant Gun Type

Hot Tags: High temp 315℃ Silicone Sealant, Wholesale, Buy, Customized, China, Cheap, Good Quality, High Quality, Manufactures, Suppliers, Made in China, Factory, Price, Price List, Quotation, CE, Free Sample
To Top
Tel:+86-20-84267539 E-mail:enquiry@gnsealant.com