1.PRODUCT FEATURE OF GNS® PU COSTING FOAM GUN TYPE T66
●Excellent adhesion to all kind of building materials;
●Can be applied easily to uneven, hard to reach surfaces where it is not possible to use traditional insulation materials;
●Excellent thermal insulation value (0.025 W/(m.K);
●Elimination of thermal bridges;
●Elimination of the dew point;
●Yield up to 3m² with 1.5cm thickness for one layer if applied from a distance of ~40cm with normal application speed;
●No need to use mechanical fastening elements after use;
●Over paintable.
2.PERFORMANCE DATA OF GNS® PU COSTING FOAM GUN TYPE T66
Basis : | Polyurethane Prepolymer |
Curing System: | Moisture cure |
Specific Gravity : | 17-28 kg/m3 |
Tack-Free Time | 4 min |
Foam Color | White |
Yield | 3 m² for 1,5 cm thickness |
Fire Class of the Cured Foam | B2 |
Thermal Conductivity | 0,025 W/m.K (at 20°C) |
Compression Strength | 0,03 MPa |
Application Temperature | +5°C to +30°C |
Full Cure | 24hours |
The results were obtained by providing optimum environmental conditions.
3.APPLICATIONS AREAS OF PU COSTING FOAM GUN TYPE T66
-
Roofing Insulation
-
Container Insulation
-
House Insulation
-
Pipe Insulation
4.APPLICATION INSTRUCTIONS OF PU COSTING FOAM GUN TYPE T66
●Each can have special plastic nozzles for spraying to the wall and roof. It will be able to fix on the PU foam gun.
Optimal can temperature is +20 °C.
Application temperature is in between +5 °C and +30 °C.
●Shake the can well before use.
●Only be removed mechanically.
●Screw the can onto an applicator gun. Put the spray nozzle on the barrel until it clicks.
●Always keep the can upside down during application.
●The output of the foam can be regulated with the trigger and controlled with the
adjustment screw on the back side of the gun.
●Spray the foam 30-45 cm distance from the wall for vertical applications.
●Spray the foam 15-20 cm distance from the ceiling for horizontal applications.
●The product can be applied at any desired thickness as long as it is applied layer by layer.
●The thicker, the higher insulation value.
●For an effective insulation value, the recommended application thickness is 5cm and should be reached to this thickness with minimum 3 layers. It is not possible to get the ideal insulation value with 1 or 2 layers.
●The nozzles and the applicator gun should be cleaned immediately after job finishes.
(Nozzle should be fitted with the foam gun while use.)
5.STORAGE AND SHELF LIFE OF PU COSTING FOAM GUN TYPE T66
Shelf life of this PU Costing Foam is 12 months in unopened packing store in temperature between +5℃ to +25℃, Keep in cool, shade and well ventilated area. Always keep the can with the valve pointed upwards.
6.PRODUCT QUALIFICATION
7.PACKING, SHIPPING AND SERVING OF PU COSTING FOAM GUN TYPE T66
Packing: 750ml/can, gross weight is 900g upon requested. 12 cans/carton. (For special specifications, please contact us.)
Shipping: Sea or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.
8.FAQ
Q: If the PU foam shrinks after curing, what effect will it bring?
A: It will damage doors and windows and the performance of PU foam will be reduced.
Q: Why should we choose a PU foam with good elasticity?A: In hot weather, because its structure inside is better.