Sanitary Anti-fungus Silicone Sealant

Sanitary Anti-fungus Silicone Sealant

Sanitary Anti-Fungus Silicone Sealant G33 is a high quality acetic silicone sealant for sealing joints around bathrooms, sinks, showers and swimming pools in high humidity areas In sewage and water supply system, PVC pipes and compounds, plate stitching, container sealing, refrigeration facilities, etc. With more than 18 years development, GNS products have been sold to 78 countries and areas all around the world which cover Asia, South America, Middle East, Europe and Africa.

Send email to us Send Inquiry

1.PRODUCT FEATURE OF SANITARY ANTI-FUNGUS SILICONE SEALANT G33

●Easy to use - one part silicone sealant, no mixing required. Can be dispensed with an ordinary caulking gun.
●Excellent adhesives for glass, ceramics, anodized aluminum, wood and polycarbonate - containing anti mold additives.
●Most bathroom and kitchen surfaces adhere well.
●Contains fungicides to prevent mold and fungal formation.
●After high elastic curing, it is suitable for deformation joints from -20℃ to +20℃.
●UV resistant
●Tolerance to most cleaning and detergents
●Non-slumping; can be used in vertical and overhead joints.

2.PRODUCT PARAMETER (SPECIFICATION) OF SANITARY ANTI-FUNGUS SILICONE SEALANT G33

Test Parameter Unit Result
As Supplied Tested at 23℃ and 50% RH
Specific Gravity g/ml 0.96±0.02
Flow (sag or slump) mm 0
Extrusion Rate ml/minute 150
Skin Time minute 5~10
Tack-free Time hour ≤1.0
Curing time (5mm) hour ≤12
As Cured-after 21 days at 23℃ and 50% RH
Durometer Hardness, Shore A Points 22
Movement Capability % ±25
Tensile/Modulus at 50% Elongation Mpa 0.24
Tensile/Modulus at 100% Elongation Mpa 0.28
Ultimate Tensile Strength Mpa 0.32
Ultimate Elongation at Break % 250

3.APPLICATION OF SANITARY ANTI-FUNGUS SILICONE SEALANT G33

--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.
--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.
--Place the cartridge into a caulking gun.
--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.

4.STORAGE AND SHELF LIFE OF SANITARY ANTI-FUNGUS SILICONE SEALANT G33

12 months from manufacture date when store in cool dry locations below 25℃, keep away from heat source and direct sunlight during storage.

5.PRODUCT CERTIFICATION:

6.PACKING, SHIPPING AND SERVING OF SANITARY ANTI-FUNGUS SILICONE SEALANT G33

Packing: 220ml to 300ml of cartridge, 590ml 600ml of sausage, 190L of drum. 24 ctgs/ctn of cartridge, 20 pcs/ctn of sausage. (For special specifications, please contact us.)
Shipping: Sea, air or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.

7.FAQ

Q: What’s the reason that after the silicone sealant cured, it will be crack out of the base material?

A: The base material is not match for silicone sealant or there are some duct on the base material surface when use the silicone sealant. In order to avoid this happen. Before use the silicone sealant, please kindly clean the base material surface and recommend to do the compatibility test.

Q: Except for silicone sealant, what other products you can provide us together?

A: We also produce the PU Foam, MS Sealant, Marble Glue, Two-component epoxy adhesive, Two-component insulating foam.


Hot Tags: Sanitary Anti-fungus Silicone Sealant, Wholesale, Buy, Customized, China, Cheap, Good Quality, High Quality, Manufactures, Suppliers, Made in China, Factory, Price, Price List, Quotation, CE, Free Sample
To Top
Tel:+86-020-84267539 E-mail:[email protected]