GNS is promoting the new product Anchor Glue, the Injectable Achoring Adhesive is two-components modified epoxy resin adhesive, with high quality plastic tube, double cartridgepackage. It's injected into holes with dispenser gun, by mixing part A and part B evenly, to plant rebars.

Product feature
• High strength  
• Wet resistance
• Anti-aging
• Convenience
• Good thixotropy
• Safe and Non-toxic
• Seismic resistance

Application Range
• Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)
•Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible.
• Anchoring structural steel connections (e.g. steel columns, beams, etc.)

Technical Data Sheet
• Viscosity of Mixture:18-22Pa•S
• Splitting tensile strength ≥8.5MPa
• Bending strength ≥50MPa
• Compressive strength ≥60MPa
• Thixotopy index ≥4.0
• Distortion temperature ≥65℃
• Steel-steel tensile shear strength ≥16MPa
• C30,φ25, L=150mm condition tensile strength ≥11MPa
• C30,φ25, L=125mm condition bonding strength ≥17MPa
• Steel-steel T impact stripping length ≤25mm

Advantages
• 100% Pass the pull-out testing
No matter test on site or sampling testing are 100% passing the test.
• Special formulas
Special formulas, making the substrates are together with the adhesive to be a new complete structure.
• Strong extensible
Epoxy have elastic reaction globule, make the chemical anchoring epoxy not only with strength, viscosity but also toughness.
• Excellent tension properties
Keep the superior properties and work-ability even under the hole smooth, damp or hot weather.

How to Use?
• Drill hole
• Clean hole
• Brush hole
• Inject adhesive
• Plant rebar
• Curing

GNS not only have the silicone sealant and PU Foam products, we are promoting the new products one by one, please kindly follow us and if something you are interesting, please feel free to contact us.